# Running MetUm-Goml3 on Archer2 **URL:** \ **Category:** Uncategorized\ **Tags:** ARCHER2\ **Created:** [17 May 2023 13:25 UTC](https://cms-helpdesk.ncas.ac.uk/t/running-metum-goml3-on-archer2/998 "2023-05-17T13:25:33Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![pmonerie](https://avatars.discourse-cdn.com/v4/letter/p/59ef9b/32.png) [@pmonerie](https://cms-helpdesk.ncas.ac.uk/u/pmonerie)\ **Post date:** [17 May 2023 13:25 UTC](https://cms-helpdesk.ncas.ac.uk/t/running-metum-goml3-on-archer2/998/1 "2023-05-17T13:25:34Z")
Hi I am trying to run MetUM-GOML3 on archer. I have copied a suite (u-cb431), I changed the account and username informations. I made a first attempt at running it (my suite is u-cw177), but I am having an error message when running fcm\_make\_kpp: [FAIL] svn://pumanew/svn/KPP\_ocean\_svn/KPP\_ocean/trunk@207: not found [FAIL] svn: E170013: Unable to connect to a repository at URL ‘svn://pumanew/svn/KPP\_ocean\_svn/KPP\_ocean/trunk’ [FAIL] svn: E210005: No repository found in ‘svn://pumanew/svn/KPP\_ocean\_svn/KPP\_ocean/trunk’ I was wondering if I should update something in the suite Best, Paul-Arthur ---
**Author:** ![RosalynHatcher](https://dub1.discourse-cdn.com/flex013/user_avatar/cms-helpdesk.ncas.ac.uk/rosalynhatcher/32/11_2.png) [@RosalynHatcher](https://cms-helpdesk.ncas.ac.uk/u/RosalynHatcher)\ **Post date:** [18 May 2023 07:29 UTC](https://cms-helpdesk.ncas.ac.uk/t/running-metum-goml3-on-archer2/998/2 "2023-05-18T07:29:04Z")
Hi Paul-Arthur, Just investigated and the KPP repository wasn’t activated on pumanew. I will need to sort that out and get back to you. Regards, Ros. ---
**Author:** ![RosalynHatcher](https://dub1.discourse-cdn.com/flex013/user_avatar/cms-helpdesk.ncas.ac.uk/rosalynhatcher/32/11_2.png) [@RosalynHatcher](https://cms-helpdesk.ncas.ac.uk/u/RosalynHatcher)\ **Post date:** [18 May 2023 10:29 UTC](https://cms-helpdesk.ncas.ac.uk/t/running-metum-goml3-on-archer2/998/3 "2023-05-18T10:29:23Z")
I think KPP repository should be good to go now. Please try re-running your suite. ---
**Author:** ![pmonerie](https://avatars.discourse-cdn.com/v4/letter/p/59ef9b/32.png) [@pmonerie](https://cms-helpdesk.ncas.ac.uk/u/pmonerie)\ **Post date:** [18 May 2023 10:59 UTC](https://cms-helpdesk.ncas.ac.uk/t/running-metum-goml3-on-archer2/998/4 "2023-05-18T10:59:23Z")
Hi Rosalyn. It worked, I have now been able to run the suite (the fcm\_make\_kpp routine), thank you! best, Paul-Arthur ---
**Author:** ![pmonerie](https://avatars.discourse-cdn.com/v4/letter/p/59ef9b/32.png) [@pmonerie](https://cms-helpdesk.ncas.ac.uk/u/pmonerie)\ **Post date:** [18 May 2023 11:08 UTC](https://cms-helpdesk.ncas.ac.uk/t/running-metum-goml3-on-archer2/998/5 "2023-05-18T11:08:19Z")
I now have the next failing as well (fcm\_make2\_kpp), and I am having this error message: "Lmod has detected the following error: The following module(s) are unknown: “epcc-job-env” I made an update of the Science Configuration Module Name (to GC3-PrgEnv/2.0/2021.12.15), as suggested here ([Trying to get a login-4c job to work on the new login nodes on ARCHER2 - #2 by RosalynHatcher](https://cms-helpdesk.ncas.ac.uk/t/trying-to-get-a-login-4c-job-to-work-on-the-new-login-nodes-on-archer2/384/2)) but I am still having the same issue. I restart the suite with rose suite-run --restart and rose suite-run --reload. Best, Paul-Arthur ---
**Author:** ![AnnetteOsprey](https://dub1.discourse-cdn.com/flex013/user_avatar/cms-helpdesk.ncas.ac.uk/annetteosprey/32/27_2.png) [@AnnetteOsprey](https://cms-helpdesk.ncas.ac.uk/u/AnnetteOsprey)\ **Post date:** [25 May 2023 09:32 UTC](https://cms-helpdesk.ncas.ac.uk/t/running-metum-goml3-on-archer2/998/6 "2023-05-25T09:32:28Z")
Hi Paul-Arthur, As we discussed, this suite is from the 4cab system so there are a few old settings in there. I will update it for Archer2 after the system upgrade. Annette