Hi, I’ve just started using Archer2 and my PI (Maria Val Martin) has a project account code n02-MRT019867. I my test suite (u-cj129) has “Account group for HPC tasks” set to n02 - is there anywhere else where Maria’s specific account code needs to be entered? Many thanks for your help, James

James please see http://cms.ncas.ac.uk/wiki/Archer2/SshAgentSetup – you will need to set up the archerum key to submit to ARCHER2 from PUMA Grenville

Thanks for this Grenville. I have completed Steps 1-4 and will do Step 5 in a couple of days once Archerum key has been installed on Archer2. James

Hi Grenville, I ran the ssh command for Step 5 and the output is shown below. (I have had to break it into 2 messages due to the limit on the number of links a new user can include in a single message.) Warning: the ECDSA host key for ‘ login.archer2.ac.uk ’ differs from the key for the IP address ‘…

(continued from previous) Are you sure you want to continue connecting (yes/no)? yes Connection to login.archer2.ac.uk closed by remote host. Connection to login.archer2.ac.uk closed. While I was not prompted for my passphrase, the output looks quite different to that on the SshAgent setup docum…

Hi James, The address for the ARCHER2 4-cabinet system changed recently and I realise we’ve not updated those instructions. So you need to use ssh login-4c.archer2.ac.uk until the full system comes online. If when you try that it complains about offending keys, then you need to edit the known_hos…

Hi Ros, Thanks for this. Just to confirm in Step 3 I have changed “login” to “login-4c” in my ~/.ssh/config file. When I then run ssh login-4c.archer2.ac.uk , I get: PTY allocation request failed on channel 0 *Comand rejected by policy. Not in authorised list * Connection to login-4c.archer2.ac.…

Hi James, That’s all absolutely fine. I’ve literally just heard from ARCHER2 that you key has been installed. So you are all setup and good to go. Cheers, Ros.

Hi Ros, Thank you, this is very helpful. All parts of my test run (u-cj196) worked except for Rose_arch_wallclock which failed with: Unloading /usr/local/share/epcc-module/epcc-module-loader Warning: Unloading the epcc-setup-env module will stop many modules being available on the system. If you…

Using correct project account code

Unified Model

Topic		Replies	Views
Switching from Archer-4c to Archer2 ARCHER2	8	434	7 January 2022
Copied UKCA version not running on ARCHER2 Rose/Cylc and FCM ARCHER2	25	368	25 February 2024
Pumatest - ARCHER2 connection and UKCA test job ARCHER2 , PUMATest	7	344	22 August 2022
Pumatest account + set-up for running MetUM on ARCHER2 Monsoon2 , ARCHER2	45	971	4 May 2022
Submitting a job to ARCHER2 Unified Model PUMA , ARCHER2 , UMUI	2	403	8 December 2022

Using correct project account code

Related topics